Roll-Off Dumpster Rental in Arlington, Texas

A roll-off is the container that arrives on a cable hoist truck and rolls off the back on rails rather than being lifted over the side. That mechanism is the whole reason access matters. To set and pull cleanly the truck wants a straight approach of roughly 60 feet, about 10.5 feet of width for the truck body and the door swing, and 20 feet or more of clear height for the hoist arm as the box comes up and over. It also needs a surface that will take the point load of a loaded rail. None of that is negotiable on the day, which is why we would rather ask about it on the phone than discover it in your street.

The overhead is the one that catches people out in Arlington. The 1970s and 1980s neighbourhoods — Woodland West, Fielder, Rush Creek, the Bowen corridor — have had fifty years for their trees to grow over the drive, and a mature post oak, live oak, cedar elm or pecan will stop a set that the driveway itself could easily have taken. Power and service drops across the front of a lot do the same. If a branch has to come back, better to know a week out. The other constraint is the ground: driveways here sit on clay that shrinks through the summer and swells again after the autumn rain, so a drive with a lifted joint or a stepped crack gets the load spread rather than concentrated.

We run all five sizes — 10, 15, 20, 30 and 40 yard — and the size question is nearly always a weight question in this market. Concrete, brick, tile and wet Blackland clay spoil from foundation work go in small boxes on a swap cycle. Household contents, cabinetry, packaging and insulation go in big ones, because they close out on space. Shingle sits in between and is denser than it looks. Tell us what the material is before you tell us how big the job feels, and read the Arlington size guide if you want to work it out yourself first.

How The Five Sizes Get Used Here

Choosing Between The Five Sizes

Start with the material. Anything dense — concrete, brick, tile, dirt or wet clay spoil — belongs in a 10 yard on a swap cycle, because weight closes the box out long before volume does. Mixed household and remodel debris is the natural home of the 20 yard, which handles a kitchen, a bathroom or a flooring job in one drop and still leaves the garage usable. Go to a 30 yard for whole-house work, an addition, a small teardown or a commercial fit-out where everything moves at once. The 15 and the 40 sit either side of those for a compact drive and for high-volume light material respectively. If you are between two sizes, take the smaller one and let us swap it — that beats part-emptying a container on your drive.

Access, Overhead Clearance And Protection Boards

Before we book, we want four things: the approach, the width, the height and the surface. The approach is roughly 60 feet of straight run for the truck to set the box down and pull it back on the cable. The width is about 10.5 feet, which sounds generous until there is a wall on one side and a parked car on the other. The height is 20 feet or more of clear air, and in Arlington that is the one that fails — mature post oak, live oak, cedar elm and pecan over the drive in the 1970s and 1980s neighbourhoods, plus service drops across the front of the lot. The surface is the last piece. Protection boards go under the rails on every set and we photograph before delivery, but boards do not fix a slab that has already moved, and these drives sit on clay that opens up through the summer. If the box has to go in the street instead, that is a different conversation, because obstructing the roadway is prohibited and affecting a lane triggers a Temporary Traffic Control Permit with three business days notice. Send a photograph of the drive and we will tell you honestly what fits.